Nobufil ABSx 3D filament is made from recycled plastics. This is production waste that occurs during industrial processing. In contrast to filaments made of conventional ABS, this 3D printing material tends to have significantly less warping and has reduced odor formation thanks to special modifications. This means that processing on printers with an open installation space is also possible.
 
The physical properties of Nobufil ABSx include high tensile strength and stiffness. It also has good heat and chemical resistance.  Printed parts can then be easily post-processed. As a result, this material is particularly suitable for the production of prototypes, models and small series of technical parts.
 
- Temperature resistance up to approx. 90°C
- Wide range of colors due to low inherent color
- Easy printability even with open construction space 
- Low odor development 
- High level of detail even with complex geometries 
 
Print Settings
- Print temperature: 260°C ± 10
- Bed temp: 100°C ± 10
- Printing surface: textured PEI sheet 
- Fan speed: max 15%
 
Technical specifications
 
 
printed  
Horizontal
injection
 moulding
unit
test
method
Tensile Strength
38
37
Mpa
ISO 527
Elongation at break
11
48
%
ISO 527
Flexural Strength
-
58
MPa
ISO 178
Flexural modulus
-
1840
MPa
ISO 178
Izod impact strength notched
4
3.5
kJ/m2
ISO 180
Izod impact strength
unnotched          
26
33
kJ/m2            
ISO 180
HDT A
-
86
°C
ISO 75
density
-
1.08
G/cm3
ISO 1183
 
 
You can download data sheets for our products here >